The 1963 Corvette Sting Ray marked a new direction for sports cars in America.
The sleek design, impressive handling and a powerful V8 made it both capable and desirable when it was released to the world. When coupled with the one-off split rear window of the 1963 model, the Corvette Sting Ray is now one of the most desirable additions for car collectors worldwide.
1:8 SCALE CORVETTE STING RAY
Your exquisitely detailed 1963 Corvette Sting Ray
Finished in Sebring Silver with red interior, the beautiful and aerodynamic body of the Corvette Sting Ray is a timeless design. The long, vented hood coupled with the raised spine and split window is immediately recognisable as one of the greatest designs of the 1960s. Underneath the hood, the 327 cubic inch V8 engine gives performance to match its looks. Now you have the opportunity to build and own this rare sports car.
Material: Body and chassis made from zamak metal
Length: 550 mm (21 1/2”)
Width: 230 mm (9”)
Height: 160 mm (6 1/2”)
Number of parts: 500 approx.
- Hand-held RC to operate electrics
- Electronically rotating headlights
- Working indicator lights with sound effect
- Engine sound
- Illuminating stop lights
- Illuminated dashboard
- Steering wheel operates the front wheels
- Opening hood, wrapover doors, windows,
and gas-filler tube cover
- Sebring Silver body with red interior
- Two sets of wheels included:
’63 or ’64 knock-offs
- Concealed spare wheel in storage rack
OUTSTANDING DETAIL YOU ONLY GET AT 1:8 SCALE
Highly realistic dashboard with detailed
dials and levers
The headlight buckets rotate to open and light up
Illuminating headlights, taillights and interior
AS PART OF THIS MODEL YOU WILL ALSO RECEIVE:
Collector’s Coffee Table Book
To accompany this stunning model, you will also receive a beautiful hard-back book featuring full-page images of the 1963 Sting Ray. World-renowned photographer, David Newhardt, has captured the uniqueness of this dream-car.
Two complete tire sets
The Sting Ray is often seen sporting knock-offs which, although specified for ’63 production models, were not available until 1964. This model comes with five original 1963 wheels PLUS five 1964 knock-offs, so you can decide which set to use!
Upgrade to the Display Edition
To celebrate the exclusive launch of this legendary classic Sting Ray, in addition to the standard 1:8 model, Agora Models are offering a limited Corvette Sting Ray Display Edition
(strictly limited to 199 worldwide)
YOUR UNIQUE LIMITED EDITION
PERSONALISED DISPLAY STAND
Plinth may differ slightly from the one shown
Your Display Edition 1963 Sting Ray comes on this beautiful,
show-quality stand, featuring the iconic Corvette logos.
As part of a limited production run, your display stand will be
individually numbered 1–199.
Your Unique Display Edition Corvette Sting Ray includes all the features of our regular 1:8 model, PLUS:
- A set of unique license plates only available with the Display Edition.
- A beautiful, show-stand quality display, featuring the iconic Corvette logos.
- An under-lit display stand giving a soft illumination to the Corvette logos.
- As part of a limited production run, your display stand name plaque will be individually numbered 1–199.
- A signed and numbered certificate of authenticity.
RESERVE YOUR DISPLAY EDITION NOW
£599 – this price includes Packs 1 – 3, including the personalised features listed above and limited Display Stand.
Choose a payment option
The Agora Models flexible payment option allows you to choose over how many months you would like your model to be delivered, allowing you to spread the cost.
Choose either our Standard Edition model, available on a regular payment plan of 12 months or 24 months, or our limited Display Edition.
This model can be purchased with a display case.
Select the “Model + Case” option to include this with your purchase.
Launches June 2023, however Pre-Orders will start shipping in April 23
Your order will be in £ Sterling
(To change to Euro, US$ or AU$ please use the country selector in the menu bar)
There’s even more to enjoy by becoming a member of the Agora Advantage Club. Simply purchasing your first model entitles you to AgoraPro-level membership, then progress to AgoraElite and AgoraMaster each time you complete an Agora model.
A beautifully illustrated hardback book about the Corvette Stingray
Complimentary Pack 1 parts for your next kit
Priority access to limited editions and early alerts about new models
All our customers enjoy the experience of the Agora Guarantee
The 1963 Corvette C2 Sting Ray
Corvette Sting Ray History
The Corvette C2 was the second generation of Chevrolet’s sports car, following on from the C1. It became popularly known as the Corvette Sting Ray and was unlike anything Corvette had released before.
The development of the new Sting Ray was influenced by various projects. Notably, the 1957 racing car Stingray which had been developed by Larry Shinoda and Peter Brock for chief stylist Bill Mitchell. Peter Brock’s initial sketches were of a coupe and an open-topped roadster. While the roadster sketch was used for the Stingray racer, when development began for the C2 the coupe sketch was refined into what would become the 1963 Sting Ray.
One of the new features for the new generation of Corvettes would be its availability as a coupe – the previous generation had only been sold as a convertible. The car was futuristically styled with a streamlined body and, most notably, had a split window – two panes of glass separated by a narrow space. This made the 1963 model particularly special, as the split-window would be removed in favour of a traditional single-pane window for the 1964 edition – one of the many reasons why the original model is so highly sought after by collectors today.
The Sting Ray featured a 327 cubic-inch small-block V8 engine that provided 250 horsepower, with the optional versions that could offer 300 hp, 340 hp, or the 360 hp of the fuel-injected Rochester engine. Although the brochure promised the availability of aluminum knock-off wheels – as seen on some of the pre-production models – they were not ready by the time the car launched. Instead, original customers of the 1963 model had steel wheels with six-ribbed hub caps fitted. Eventually, the aluminum knock-offs were made available in 1964 for $322.
General Motors (GM) had a racing ban in place which stopped its brands offering track ready cars. Despite this, Chief engineer for Corvette, Zora Arkus-Duntov, designed the Z06 package for the new 1963 model (some suggest the “Z0” in the name refers directly to “Z0ra”). Those customers who specified a need for a “fuelie” would get everything they’d need to maximise the performance of the new car: the fuel injected small-block V8 provided 360 hp coupled with a close ratio 4-speed transmission; the dual-circuit master cylinder and brakes with sintered metallic linings and fins reigned it in for the corners; while a bigger front stabilizer bar, stiff springs and larger shock absorbers could withstand the rigours of the track. Those who added the N03 option – a larger 36.5 gallon fuel tank – would see the benefit in endurance racing.
These options were not cheap: a base model coupe would set you back $4,257 in 1963 while the Z06 upgrade package with the N03 tank would add nearly an extra 50% to the price, costing $2020 ($1818 for Z06 and $202 for N03). In all, only 199 cars were given the Z06 upgrade, 15 of which were sent to racing teams. Fittingly, there were only 63 cars sold with the N03 tank, making the combination of a Z06/N03 “Big Tank” Sting Ray a rare find – especially when so many were raced and inevitably lost to wear or crashes! It is estimated that only 50 Corvette Sting Ray Z06/N03 are known to still exist.
When combining so many rare elements – the split rear window of the 1963 model, with the obscure upgrade of the Z06 package and the optional addition of a “Big Tank” for endurance racing – it’s easy to see why a Corvette Sting Ray Z06/N03 is so sought after by collectors today.
Car type: Two-seater coupe
Dimensions: 445.3 cm (175 5/16 in) long, 176.8 cm
(69 5/8 in) wide, 125.2 cm (49 5/16 in) high
Kerb weight: 1377 kg (3036 lbs)
Wheelbase: 248.9 cm (98 in)
Power: 360 bhp
Torque: 351 lb-ft (477 Nm) at 6000 rpm
Engine type: Small Block 327 V8,
Displacement: 5354 cc
Transmission: 4-speed manual
Layout: front, longitudinally mounted
Top speed: 147 mph (237 km/h)
0-60 mph: 5.7sec
Corvette C2 Sting Ray Trivia
According to some, Corvette’s chief stylist Bill Mitchell returned one day from a fishing trip in Bimini, the sport fishing capital of the world, with a taxidermy Mako shark he had caught. With the Sting Ray launch still a time away, he decreed that a new show car was needed and that the shark would be a perfect theme for it – including the colour of the Mako. The XP-755, dubbed the Mako Shark, took design elements from the Sting Ray, but its color was an arduous task for the paint team to replicate from the shark. With Mitchell insisting the two must match and after numerous failed attempts, the paint crew supposedly kidnapped Mitchell’s fishing trophy and simply sprayed it to mirror the car!
Zora Arkus-Duntov also developed the Grand Sport Corvette using the Sting Ray, a secret project born from a desire to compete in racing with Ford and the Shelby Cobra. This model was designated the “Lightweight” as the team behind it cut as much weight from the production model as possible. An aluminum cage replaced the standard steel version, with thin fiberglass body panels and magnesium-cast wheels bringing the weight down by 1000 lbs. Although 125 were planned, when budget-minded GM executives discovered the project, it was shut down with only 5 models ever produced.
Sting Ray or Stingray? The original racing car of 1959 was developed officially as the XP-87 and given the aquatic moniker “Stingray” by deep-sea fishing enthusiast Bill Mitchell – the racing ban prevented it being identified as a Corvette. The C2, however, was released with the badge “Sting Ray”, which persisted throughout its lifetime from 1963 to 1967. Fast forward to the third generation C3, it was back to “Stingray”. By 1976, the name had disappeared entirely – until the release of the seventh-generation Corvette in 2014, again as “Stingray”.
Although his sketches would eventually become the 1963 Sting Ray, Peter Brock left GM in 1959 to pursue a career in racing. In 1961, he became the first paid employee of Carroll Shelby when hired to run the Carroll Shelby School of High Performance Driving. He worked at Shelby American until 1965, designing the logos, merchandise, ads, and car liveries, as well as components and bodies for various Shelby cars including the 1964 Shelby Daytona Cobra Coupe.
Never miss a thing
Stay up to date with the latest model news, offers and opinions. Sign up here for monthly updates direct to your inbox.
This is not a toy. Not suitable for children under 14 years old due to small parts. Adult supervision required.
WARNING: Some parts are assembled using magnets. These magnets can cause serious injury if they are swallowed. Keep away from children. If you suspect a magnet has been swallowed, seek medical help straight away.
©Agora Models 2022. General Motors Trademarks used under license by Premium & Collectibles Trading Co. Ltd on behalf of Agora Models.